Knoppix 3.4 روی هارد دیسک
|
2004-08-06, 03:15 PM,
ارسال : #1
|
|||
|
|||
Knoppix 3.4 روی هارد دیسک
دوستان عزیز کسی هست توضیح بده چه طور می توان Knoppix را روی هارد دیسک نصب کرد؟
Knoppix 3.4 |
|||
2004-08-06, 03:33 PM,
ارسال : #2
|
|||
|
|||
می تونید از knoppix-installer ( اگر درست نوشته باشم.) که روی دسکتاپ خودش هست استفاده کنید.
irix@Hell:~$ mkfs -t Free /body/.mind && mount -o rw /body/.mind /FreeMind |
|||
2004-08-06, 03:33 PM,
ارسال : #3
|
|||
|
|||
..
[ltr] $Nəvid$ In a world without any fences or walls, Who needs gates or windows ? گنو ایران | لیست مقالات فارسی گنو ایران | [/ltr] |
|||
2004-08-06, 03:33 PM,
ارسال : #4
|
|||
|
|||
[ltr]
_Starting the Install_ From the Knoppix root shell type the magic words (drum roll...) #knx2hd or #knoppix-installer or #ignore_check=1 sudo knoppix installer There are slight differences between each script, (apparently... but I don't know?), however, the end result is Knoppix on the hard drive. If you find that you need to partition the disk (during the knoppix install) because it fails to meet the requirements, try the qtparted program that Knoppix presents during the install. Note: Qtparted seems to be buggy at times, I haven't had a lot of success with it. Note: Sometimes the Knoppix installer gets 'stuck' at HDD partitioning and needs a little coaxing. Try rebooting, try setting the swap at the end of the disk and rewriting the partition table, try using qtparted to define partitions, try different variants of the knoppix hard drive install command (see above)...try anything! [Qn: Can someone research this problem, i had a brief look on knoppix.net, but couldn't find anything.] Persevere until the Knoppix Hard Drive Installer Menu with 6 menu options appears. The most important menu option is 'Start Installation', choose this when it appears. When asked to install beginner, Knoppix or the Debian way, choose the Debian method. When asked to select the file system type, select reiserfs. The next series of questions require the input of information about the user and the system. 1- The users full name: Computerbank User 2- The users login name: user 3- The user password: cbvsys 4- The root password: cbvsys 5- The Hostname: the cbvid number from the tech spec form, ie: if cbv1890, the name would be cbv1890 When asked where to install LILO, accept the default option, the master boot record (mbr). Before the install starts, a dialogue box will appear to confirm the install options, clicking on Next..or hitting the enter key, will start the install. A progress dialogue box will appear, and remain, on the screen during the install. Note: The install can take around 20-40 mins depending on the capacity of the system. Just before the install finishes, another dialogue box will appear to ask if a rescue floppy disk should be made. Select no. Finally a dialogue box that announces "knoppix has been successfully installed" will appear and the installation is complete. When done, reboot the computer so that Knoppix loads from the hard drive instead of the CD ROM (take the CD out) and login as the user created during the install [/ltr] شرمنده يکم... bl2k |
|||
|