مشکل با cdrecord
|
2005-04-15, 04:32 PM,
ارسال : #1
|
|||
|
|||
مشکل با cdrecord
این cdrecord بد جوری داره حال من رو میگیره چی کارش کنم اخه؟؟؟
طبق مقاله موجود در سایت جلو رفتم اما با IDE مشکل داره ... [ltr] linux:~ # cdrecord -v dev=/dev/hdc speed=4 -isosize /dev/scd0 cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent default s. cdrecord: Continuing in 5 seconds... Cdrecord-Clone-dvd 2.01a27 (i686-suse-linux) Copyright © 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to <!-- m --><a class="postlink" href="http://www.suse.de/feedback">http://www.suse.de/feedback</a><!-- m --> Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM scsidev: '/dev/hdc' devname: '/dev/hdc' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Using libscg version 'schily-0.8'. cdrecord: Warning: using inofficial libscg transport code version (<!-- e --><a href="mailto:[email protected]">[email protected]</a><!-- e -->-scsi-linux-sg.c-1.80-resmgr-patch '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'PLEXTOR ' Identifikation : 'CD-R PX-W5224A' Revision : '1.03' Device seems to be: Generic mmc CD-RW. Current: 0x0009 Profile: 0x0008 Profile: 0x0009 (current) Profile: 0x000A Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC FORCESPEED SPEEDREAD SINGLESESSION HIDECDR Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1190112 = 1162 KB FIFO size : 4194304 = 4096 KB cdrecord: No such device or address. Cannot open '/dev/scd0'.[/ltr] همیشه میتونی بهترین باشی ... |
|||
2005-04-15, 11:16 PM,
ارسال : #2
|
|||
|
|||
سلام
فکر کنم برای استفاده از این باید CD Drive خودت رو به حالت SCSI ببری. چون دنبال scd0 میگرده. اگه هم cd writer ت در fstab اینوری تعریف نشده باید در تنظیمات عوضش کنی. من زیاد با این برنامه کار نکردم. این روزا با K3B کی میره تو غار ؟ [ltr] Home: Arch Linux, AMD X2 4600, 2 GB, 250 GB, [/ltr] |
|||
2005-04-16, 07:53 AM,
ارسال : #3
|
|||
|
|||
آیا مطمئن هستید که آدرس رایترتوت dev/scd0/ هست؟
[ltr]Life *free = new Life(const long OpenSource);[/ltr] |
|||
|