squid
|
2006-12-18, 02:02 PM,
ارسال : #1
|
|||
|
|||
squid
با سلام
از دوستان كسي اگر ممكنه مشكل اين كانفيگ رو بگه ممنون ميشم : # Need for transparent proxy # You need to --enable-ipf-transparent http_port 3128 httpd_accel_host virtual httpd_accel_port 80 httpd_accel_with_proxy on httpd_accel_uses_host_header on # Physical memory cache_mem 128 MB # Max out Squid I/O perfomance, 15 GB cache and use Squid special diskd but you need to recompile the kernel # To use disk you need to --enable-storeio=diskd,ufs # Reasonable values for Q1 and Q2 are 72 and 64, respectively. # Q1 value must bigger Q2 #cache_dir diskd /usr/local/squid/cache 15360 16 256 Q1=72 Q2=64 #or # You can use normal ufs instead #cache_dir ufs /usr/local/squid/cache 15360 16 256 # I dont want to log anything # The reason is to save some expensive I/O operation. #cache_access_log /dev/null #cache_store_log none #cache_log /dev/null #or we want to store everything # cache dir cache_dir ufs /var/spool/squid 1000 16 256 coredump_dir /var/spool/squid # cache logfile cache_access_log /var/log/squid/access.log cache_store_log /var/log/squid/store.log cache_log /var/log/squid/cache.log # listen ports http_port 3128 icp_port 3130 # cache defaults cache_mgr <!-- e --><a href="mailto:[email protected]">[email protected]</a><!-- e --> ftp_user <!-- e --><a href="mailto:[email protected]">[email protected]</a><!-- e --> visible_hostname SecureHost # Cache replacement policy # The heap GDSF policy optimizes object-hit rate by keeping smaller popular # objects in cache, so it has a better chance of getting a hit. It achieves a # lower byte hit rate than LFUDA, though, since it evicts larger (possibly popular) # objects. # The heap LFUDA ( Least Frequently Used with Dynamic Aging ) policy keeps # popular objects in cache regardless of their size and thus optimizes byte hit # rate at the expense of hit rate since one large, popular object will prevent # many smaller, slightly less popular objects from being cached. # You need to --enable-removal-policies cache_replacement_policy GDSF # Standard Access List # I have two subnets, one for student and another one for admin # Modify this according to your network acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl outgoing src 192.168.1.0/255.255.255.255 acl admin src 192.168.100.0/255.255.255.255 acl SSL_ports port 443 563 acl Safe_ports port 80 # http acl Safe_ports port 20 # Dftp acl Safe_ports port 21 # ftp acl Safe_ports port 443 563 # https, snews acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl Safe_ports port 3000 # MAIL acl CONNECT method CONNECT #Http Access http_access allow manager http_access allow localhost http_access allow outgoing http_access allow admin http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access deny all #Icp Access icp_access allow localhost icp_access allow outgoing icp_access allow admin icp_access deny all # Avoid caching cgi scripts acl QUERY urlpath_regex cgi-bin no_cache deny QUERY acl magic_words1 url_regex -i 192.168 acl magic_words2 url_regex -i ftp .exe .mp3 .vqf .tar.gz .gz .rpm .zip .rar .avi .mpeg .mpe .mpg .qt .ram .rm .iso .raw .wav .mov # Delay Pool # For delay pool, you need to --enable-delay-pools delay_pools 2 # I have ADSL 2Mbits line On Our Office # 2 mbits == 256 kbytes per second # 256 KB/s, 5 KB/s # It means 256 KB/s bandwith for the whole network, but 10 KB/s for each node, which is fair for everybody delay_class 1 2 delay_parameters 1 256000/256000 10000/256000 delay_access 1 allow magic_words2 delay_access 1 allow student delay_access 1 allow admin # -1/-1 means that there are no limits for local traffic. delay_class 2 2 delay_parameters 2 -1/-1 -1/-1 delay_access 2 allow magic_words1 # Cancel download if file is bigger than 1MB #reply_body_max_size 1024 KB # snmp stuff #Acl snmp acl snmppublic snmp_community public snmp_access allow snmppublic localhost snmp_access deny all # Change to your domain # visible_hostname yourdomain.domain.com # cache_mgr <!-- e --><a href="mailto:[email protected]">[email protected]</a><!-- e --> #Create cache dir and create swap # mkdir /usr/local/squid/cache # chown nobody:nogroup cache # /usr/local/squid/bin/squid -k parse # /usr/local/squid/bin/squid -z #Configure transparent proxy with ipfilter #Edit /etc/rc.conf #add these lines to enable ipfilter #ipfilter_enable="YES" #ipnat_enable="YES" #ipmon_enable="YES" #ipfs_enable="YES" #Edit /etc/ipnat.rules # add this line # I assume rl0 is your internal nic # Redirect everything else to squid on port 3128 #rdr rl0 0/0 port 80 -> 127.0.0.1 port 3128 tcp # cache peering :>> If We Have a Another Aquid And It Was The Secendory Squid ..... #cache_peer <proxy> parent 3128 3130 proxy-only #cache_peer parent.foo.net parent 3128 3130 proxy-only #cache_peer sib1.foo.net sibling 3128 3130 proxy-only #cache_peer sib2.foo.net sibling 3128 3130 proxy-only #icp_access allow lan #icp_access deny all #Microsoft Update Refresh Time refresh_pattern <!-- m --><a class="postlink" href="http://*.windowsupdate.microsoft.com/">http://*.windowsupdate.microsoft.com/</a><!-- m --> 0 80% 20160 reload-into-ims refresh_pattern <!-- m --><a class="postlink" href="http://office.microsoft.com/">http://office.microsoft.com/</a><!-- m --> 0 80% 20160 reload-into-ims refresh_pattern <!-- m --><a class="postlink" href="http://windowsupdate.microsoft.com/">http://windowsupdate.microsoft.com/</a><!-- m --> 0 80% 20160 reload-into-ims refresh_pattern <!-- m --><a class="postlink" href="http://wxpsp2.microsoft.com/">http://wxpsp2.microsoft.com/</a><!-- m --> 0 80% 20160 reload-into-ims refresh_pattern <!-- m --><a class="postlink" href="http://xpsp1.microsoft.com/">http://xpsp1.microsoft.com/</a><!-- m --> 0 80% 20160 reload-into-ims refresh_pattern <!-- m --><a class="postlink" href="http://w2ksp4.microsoft.com/">http://w2ksp4.microsoft.com/</a><!-- m --> 0 80% 20160 reload-into-ims refresh_pattern <!-- m --><a class="postlink" href="http://download.microsoft.com/">http://download.microsoft.com/</a><!-- m --> 0 80% 20160 reload-into-ims refresh_pattern <!-- m --><a class="postlink" href="http://download.macromedia.com/">http://download.macromedia.com/</a><!-- m --> 0 80% 20160 reload-into-ims refresh_pattern <!-- m --><a class="postlink" href="ftp://ftp.nai.com/">ftp://ftp.nai.com/</a><!-- m --> 0 80% 20160 reload-into-ims refresh_pattern <!-- m --><a class="postlink" href="http://ftp.software.ibm.com/">http://ftp.software.ibm.com/</a><!-- m --> 0 80% 20160 reload-into-ims من هر كاري ميكنم از اين قسمت ايراد ميگيره : httpd_accel_host virtual httpd_accel_port 80 httpd_accel_with_proxy on httpd_accel_uses_host_header on ؟؟؟؟؟؟؟؟؟؟؟؟ مشكل از چيه ؟؟ لطف ميكنيد راهنمايي كنيد و بفرماييد چطور حلش كنم ( اين مقاله كانفيك اسكوئيد روي freeBSD بود كه من كپيش كردم ...) باي |
|||
2006-12-18, 06:37 PM,
ارسال : #2
|
|||
|
|||
ورژن 2.6 ؟؟؟
|
|||
2006-12-19, 04:05 AM,
ارسال : #3
|
|||
|
|||
از rpm استفاده میکنید یا source امپایل کردین؟
در ضمن این squid ایراد زیاد داره یه نمونه refresh ها |
|||
2006-12-19, 03:16 PM,
ارسال : #4
|
|||
|
|||
با سلام
من از فدوراي 6 استفاده مي كنم و از خود سي دي فدورا نصب كردم و نميدونم حالا بايد چي كار كنم . اگر ممكنه راهنمايي كنين . ممنون باي |
|||
2006-12-19, 09:01 PM,
ارسال : #5
|
|||
|
|||
من از FC4 استفاده میکنم و از نسخه rpm خود FC4 استفاده میکنم و بدونه هیچشکلی کار میکنه
به نظر من FC4 از همشون بهره برای کش |
|||
2006-12-20, 12:41 AM,
ارسال : #6
|
|||
|
|||
نسخه 2.5 نصب کنید مشکلتون حل میشه
نرم افزار مانیتورینگ شبکه اختصاصی شده به همراه تقویم شمسی و ... |
|||
2006-12-20, 01:46 PM,
ارسال : #7
|
|||
|
|||
httpd_accel_host virtual
httpd_accel_port 80 httpd_accel_with_proxy on httpd_accel_uses_host_header on این ۴ تا دستور تو squid2.6 تبدیل به یه دستور شده . یادم نیست چی بود پیداش می کنم بهت می گم Don't bother, we're using GNU/Linux everywhere, even there Linuxmotto گروه کاربران لینوکس اصفهان |
|||
2006-12-21, 09:15 AM,
ارسال : #8
|
|||
|
|||
لینک زیر رو بخونید:
<!-- m --><a class="postlink" href="http://www.deckle.co.za/squid-users-guide/Transparent_Caching/Proxy">http://www.deckle.co.za/squid-users-gui ... hing/Proxy</a><!-- m --> Don't bother, we're using GNU/Linux everywhere, even there Linuxmotto گروه کاربران لینوکس اصفهان |
|||
2007-01-16, 03:14 AM,
ارسال : #9
|
|||
|
|||
سلام به همگي.
با عقب نشيني مشكلي حل نميشه. جديدا نسخه 2.5 با wccp مشكل پيدا كرده. به همين خاطر من سعي بر اين دارم كه به نسخه 2.6 برم. لينك بالا هم ديدم ولي متاسفانه بازم مشكل كانفيگ هل نشد. اين اولين پست من تو انجاست. تغريف اين سايتو زياد شنيده بودم . راستي كانفيگ wccp هم تعغير كرده. از دوستان عزيزي كه در اين ضمينه مهارت دارند. تقاضا مندم كه راهنمايي اساسي كنند و يا كانفيگ تست شده لطف كنند. متشكرم. |
|||
|