[sayyedahmadhosayni]

با سلام خدمت تمام اساتید عزیز

سوال من در مورد
openSUSE 11 و corecess_3112ug
هستش

من طبق آموزش این صفحه تونستم مودم ADSL رو در Ubuntu نصب کنم
<!-- m --><a class="postlink" href="http://forum.ubuntu.ir/index.php?topic=2467.0">http://forum.ubuntu.ir/index.php?topic=2467.0</a><!-- m -->
مودم نصب شد و راحت ازش استفاده میکنم

حالا تصمیم دارم مودم رو تو openSUSE11 نصب کنم
این فایل رو دانلود و نصب کردم
eciadsl-usermode-0.12-1.i386.rpm
eciadsl-usermode-0.12.tar.gz
در زیر مراحل نصب موردم از ترمینال رو نشون میدم

linux-rmjy:~ # sudo eciadsl-config-text

===== Welcome to the EciAdsl Linux driver configuration =====

At any time, press Ctrl+C to quit this script without saving modifications.

Tip: you can run eciadsl-config-text with a .bin file as parameter to change
your .bin quickly.

Your choice:

1) Configure all settings
2) Remove dabusb module
3) Change synch .bin file

Enter your choice (1-3, default is 1): 1

===> EciAdsl driver setup <===

Current user name is: zan-5239920
Type in your user name (given by your provider, press ENTER to keep the previous one):
* user name unchanged

Current password is: 5239920
Type in your password (given by your provider, press ENTER to keep the previous one):
* password unchanged

Select your provider:

1) AR..Telviso
2) AU..Arachnet
3) AU..iiNet
4) AU..Pacific Internet
5) AU..TPG
6) BE..Belgacom Skynet
7) BE..EDPnet
8) BE..Easynet
9) BE..Openweb
10) BE..PlanetInternet
11) BE..Tiscali Belgium
12) BR..Global Village Telecom
13) CH..Bluewin
14) CH..Econophone
15) CH..Netstream
16) CH..SolNet
17) CH..Sunrise
18) DK..Cybercity
19) DK..Tiscali
20) EG..Noor
21) EG..Menanet
22) ES..Auna
23) ES..Telefonica (ya.com)
24) ES..Wanadoo Spain
25) FI..Elisa Communications
26) FR..9 Telecom
27) FR..Cegetel
28) FR..Club-Internet
29) FR..Easynet
30) FR..Free
31) FR..Nerim
32) FR..Tele2
33) FR..Tiscali
34) FR..Wanadoo (France Telecom)
35) FR..World Online/Tiscali
36) HU..MonorNet
37) IL..Bezeq Intl.
38) IL..Internet Zahav IL
39) IL..Kavei Zahav
40) IL..Netvision
41) IT..Alice Telecom
42) IT..Infostrada
43) IT..Telecom Italia
44) IT..Tiscali Italia
45) PE..Telefonica del Peru
46) PL..Neostrade/TPnet
47) PT..Clix
48) PT..Sapo
49) PT..ViaNetwork
50) RU..Avangard
51) RU..WebPlus
52) SE..Telenordia
53) SG..Pacific Internet
54) SG..Singnet
55) UK..British Telecom
56) UK..Giointernet
57) UK..Kingston/Karoo Rapidtime
58) UK..Pipex UK
59) Other

Enter your choice (1-59, default is 1): 59

If your provider was not listed (or if you want to overwrite
defaults), you can type in your own DNS servers:

DNS1 currently unset
Type in an IP for DNS1 (press ENTER to skip):

DNS2 currently unset
Type in an IP for DNS2 (press ENTER to skip):

Enter now your VPI/VCI (depending on your provider/country)
Example for France: 8 35 (VPI=8, VCI=35)
These values correspond to the number dialed under Windows.

VPI currently set to 0
Type in your VPI (given by your provider, press ENTER to keep the previous one): 0

VCI currently set to 35
Type in your VCI (given by your provider, press ENTER to keep the previous one): 35

Select your modem:

1) Previous setting (Other)
2) Aethra Starmodem
3) Allnet ALL768UB
4) Archtek UGW-8000
5) Askey ALE070
6) Askey ALE130
7) Askey ALE150
8) Asus AAM6000UG
9) Atlantis Land I-Storm
10) Aztech 100U
11) BT Voyager
12) BT Voyager 100
13) BT Voyager 105
14) Conceptronic ConADSLUG
15) Conitech Kiowa
16) Cypress Globespan G7000
17) D-Link DSL200
18) D-Link DSL200 rev B
19) D-Link DSL200 rev B1
20) D-Link DSL200 generation III
21) Digicom MichelAngelo
22) Dynalink ALE070
23) ECI B-Focus
24) ECI HiFocus
25) Eicon Diva
26) Ericsson hm120dp
27) Ericsson hm121dp/di
28) Fujitsu FDX310
29) GVC BB039
30) IPM Datacom Webpower
31) IPM Datacom Dataway USB
32) IPM Datacom SpeedWeb USB
33) Kraun ADSL USB (#1)
34) Kraun ADSL USB (#2)
35) Linkmax HSA 100
36) Lucent CellPipe USB-20A (#1)
37) Lucent CellPipe USB-20A (#2)
38) Lucent CellPipe USB-20A (#3)
39) Nortek 2020 (#1)
40) Nortek 2020 (#2)
41) Nortek 2021 (#1)
42) Nortek 2021 (#2)
43) Nortek 2021 (Tiscali)
44) Onixon DSL100U
45) Prolink Hurricane 7000
46) Siemens Santis (#1)
47) Siemens Santis (#2)
48) Siemens Santis (#3)
49) Siemens Santis 10
50) Siemens Santis 100
51) SMC 7003 V.2 USB ADSL
52) Solwise SAR100
53) Solwise EA100
54) Supergrass Surfer
55) Telewell TW-EA100
56) Topcom Webr@cer 850
57) Topcom XPlorer 850
58) Turbocomm EA100
59) Turbocomm EA103
60) US Robotics 8500
61) Virata (Tiscali)
62) Wisecom ws-ad80usg
63) WyTek FM028
64) Xavi X7005Q2
65) Xentrix USB
66) Zoom 5510 ADSL
67) Zyxel Prestige 630-41
68) Other

Enter your choice (1-68, default is 1): 68

If your modem was not listed (or if you want to overwrite defaults),
you can enter your own VID1/PID1/VID2/PID2 (use eciadsl-probe-device
to get them), Globespan chipset and USB alt interface values:

VID1 currently unset
Type in a VID1 (4-digit hexadecimal): 0915

PID1 currently unset
Type in a PID1 (4-digit hexadecimal): 8102

VID2 currently unset
Type in a VID2 (4-digit hexadecimal): 0915

PID2 currently unset
Type in a PID2 (4-digit hexadecimal): 8102

Select your modem chipset:

1) Previous setting ()
2) GS7070
3) GS7470

Enter your choice (1-3, default is 1): 3

USB ALT INTERFACE for SYNCH process currently set to
Type in the USB ALT INTERFACE for SYNCH (1-digit decimal (0-5) , press ENTER to keep current value): 0

USB ALT INTERFACE for PPPOECI process currently set to 4
Type in the USB ALT INTERFACE for PPPOECI (1-digit decimal (0-5) , press ENTER to keep current value): 0

Select your .bin file for synch:

1) Previous setting (/etc/eciadsl/gs7470_synch18.bin)
2) /etc/eciadsl/gs7470_synch12.bin
3) /etc/eciadsl/gs7470_synch16.bin
4) /etc/eciadsl/gs7470_synch10.bin
5) /etc/eciadsl/gs7470_synch06.bin
6) /etc/eciadsl/gs7470_synch11.bin
7) /etc/eciadsl/gs7470_synch14.bin
8) /etc/eciadsl/gs7470_synch18.bin
9) /etc/eciadsl/gs7470_synch20.bin
10) /etc/eciadsl/gs7470_synch15.bin
11) /etc/eciadsl/gs7470_synch08.bin
12) /etc/eciadsl/gs7470_synch19.bin
13) /etc/eciadsl/gs7470_synch21.bin
14) /etc/eciadsl/gs7470_synch01.bin
15) /etc/eciadsl/gs7470_synch09.bin
16) /etc/eciadsl/gs7470_synch22.bin
17) /etc/eciadsl/gs7470_synch03.bin
18) /etc/eciadsl/gs7470_synch04.bin
19) /etc/eciadsl/gs7470_synch02.bin
20) /etc/eciadsl/gs7470_synch17.bin
21) /etc/eciadsl/gs7470_synch05.bin
22) /etc/eciadsl/gs7470_synch13.bin
23) /etc/eciadsl/gs7470_synch07.bin

Enter your choice (1-23, default is 1): 8
Select your PPP mode (use the DEFAULT one if you don't know what this means):

1) Previous setting (LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS)
2) VCM_RFC2364
3) LLC_RFC2364
4) LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS
5) VCM_RFC_1483_BRIDGED_ETH
6) LLC_RFC1483_ROUTED_IP
7) VCM_RFC1483_ROUTED_IP

Enter your choice (1-7, default is 1): 4

In current config, DHCP is enabled
Is DHCP used by your provider (MOST users should say NO)?
(y/n or press ENTER to keep current value) y

==== Configuration will be created with these values :

+ User : zan-5239920
+ Password : (hidden)
+ Provider : Other
DNS 1 :
DNS 2 :
+ VPI/VCI : 0/35
+ Modem : Other
GS chipset : GS7470
VID1/PID1 : 0915/8102
VID2/PID2 : 0915/8102
ALT SYNCH : 0
ALT PPPOECI : 0
+ .bin file : /etc/eciadsl/gs7470_synch18.bin
+ PPP mode : LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS
+ use DHCP : yes
+ use static IP : yes

Press ENTER to create config files or Ctrl+C to exit now without saving.

backing up /etc/ppp/chap-secrets to /etc/ppp/chap-secrets.bak1.. OK
modifying /etc/ppp/chap-secrets.. OK
backing up /etc/ppp/pap-secrets to /etc/ppp/pap-secrets.bak1.. OK
modifying /etc/ppp/pap-secrets.. OK
backing up /etc/ppp/peers/adsl to /etc/ppp/peers/adsl.bak.. OK
modifying /etc/ppp/peers/adsl.. OK
backing up /etc/eciadsl/eciadsl.conf to /etc/eciadsl/eciadsl.conf.bak.. OK
updating /etc/eciadsl/eciadsl.conf..OK

==== eciadsl-config-text: Configuration updated with success !
You can now run eciadsl-start (as root) to connect to the internet.

linux-rmjy:~ # sudo eciadsl-start

[EciAdsl 1/5] Setting up USB support...

Preliminary USB device filesystem is missing... trying to mount
Loading tun/tap module...
tun loaded successfully

[EciAdsl 2/5] Uploading firmware...

Process skipped .. no more needed
firmware loaded successfully

[EciAdsl 3/5] Synchronization...

OK eciadsl-synch: success
Synchronization successful

[EciAdsl 4/5] Connecting to provider...

Connection successful

[EciAdsl 5/5] Setting up route table...

Waiting for tap0...
linux-rmjy:~ # ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:11246 errors:0 dropped:0 overruns:0 frame:0
TX packets:11246 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:642427 (627.3 Kb) TX bytes:642427 (627.3 Kb)

tap0 Link encap:Ethernet HWaddr 00:FF:D2:DF:5D:9E
inet6 addr: fe80::2ff:d2ff:fedf:5d9e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 b) TX bytes:398 (398.0 b)


خوب tap0 ساخته شده

حالا سوال من
تو ابونتو من این دستور رو میزدم و یه اتصال میساختم
sudo pppoeconf tap0
و
sudo pon dsl-provider

اما تو سوزه این وجود نداره
حالا وقتی از Yast استفاده میکنی نه مودم و نه Tap0 رو نشون میده
به این عکس نگاه کنید
<!-- m --><a class="postlink" href="http://6dda1a.bay.livefilestore.com/y1pMFFKyAVpLGjBu3migaLyXxw6wMGJUGhBkSX31FstuVn_6_tMCHwt31NHzUmQVrGjB46cJOOqlG8/snapshot1.png">http://6dda1a.bay.livefilestore.com/y1p ... pshot1.png</a><!-- m -->

با کمک دوستان p30world یه آموزش پیدا کردم که آدرسش اینه
<!-- m --><a class="postlink" href="http://lifestory.moqin.com/?p=356">http://lifestory.moqin.com/?p=356</a><!-- m -->

اگه میشه کمک و راهنمایی کنید

ببخشید که اینهمه توضیحات دادم

[sayyedahmadhosayni]

لطفا راهنمایی کنید

[honeyos]

من سوسه کار کردم از yast رفتم dsl و network manager رو فعال کردم مشکلی واسم پیش نیومد.. اما روش شما رو نمی دونم

[مهمان]

سلام

اگه به عکس نگاه کنید میبینید که مودم یا tap0 برای سیستم ناشناخته است
اما من تو هر آموزشی که دیدم مودم های اونا تعریف شده بود

مشکل من هم اینجاست که Yast اصلا نمیشناسه

البته من تنها آموزشی که برای نصب اون نوع مودم پیدا کردم اون بود
اگه آموزش دیگه ای آشنا دارید ممنون میشم

[honeyos]

راستی مودم شما dealup هست یا adsl
اگه منظورتون مودم دایل اپ هست خوبه از اینجا درایورش رو هم بگیرید از اینجا
<!-- w --><a class="postlink" href="http://www.linuxant.com">www.linuxant.com</a><!-- w -->

[honeyos]

پس باید اول درایور مودمت رو بگیر از همین جا
hcf مودم adsl هست
ضمنا باید ورژن کرنلت رو هم بدونی از این دستور uname -r
با توجه به کرنلت درایورت رو بگیر

[sayyedahmadhosayni]

سلام
خیلی ممنون از لطفتون
من مودممADSL هست و مودم رو نصب کردم <رژن کرنل هم تو SUSE11 معلومه

مشکل اینجاست که Yast اتصال مودم منو Tap0 نمیشناسه
همین

[sayyedahmadhosayni]

هر حرف شما کلی میتونه کمک کنه
خواهشا منو بی نصیب نزارید