لطفا وارد شوید یا ثبت‌نام کنید تا به انجمن‌ها دسترسی کامل داشته باشید.



 
امتياز موضوع :
  • 1 رأي - معدل امتيازات : 5
  • 1
  • 2
  • 3
  • 4
  • 5
چگونگي نصب کارتهاي ماهواره(DVB)
2012-10-17, 08:48 PM,
ارسال : #1321
Re: چگونگي نصب کارتهاي ماهواره(DVB)
استاد من شرمنده هستم وقت شما را هم گرفتم اما با اجرای دستور آخری این ارور را داد
کد :
2 m2m@m2m-EP41-UD3L ~/vdr-1.7.29 % make plugins
Plugin dvbhddevice:
make[1]: Entering directory `/home/m2m/vdr-1.7.29/PLUGINS/src/dvbhddevice'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/m2m/vdr-1.7.29/PLUGINS/src/dvbhddevice'
Plugin dvbsddevice:
make[1]: Entering directory `/home/m2m/vdr-1.7.29/PLUGINS/src/dvbsddevice'
xgettext -C -cTRANSLATORS --no-wrap --no-location -k -ktr -ktrNOOP --package-name=VDR --package-version= --msgid-bugs-address='<see README>' -o po/dvbsddevice.pot `ls dvbsddevice.c dvbsdffdevice.c dvbsdffosd.c`
make[1]: Leaving directory `/home/m2m/vdr-1.7.29/PLUGINS/src/dvbsddevice'
Plugin epgtableid0:
make[1]: Entering directory `/home/m2m/vdr-1.7.29/PLUGINS/src/epgtableid0'
xgettext -C -cTRANSLATORS --no-wrap --no-location -k -ktr -ktrNOOP --package-name=vdr-epgtableid0 --package-version=0.0.1 --msgid-bugs-address='<see README>' -o po/epgtableid0.pot epgtableid0.c
make[1]: Leaving directory `/home/m2m/vdr-1.7.29/PLUGINS/src/epgtableid0'
Plugin hello:
make[1]: Entering directory `/home/m2m/vdr-1.7.29/PLUGINS/src/hello'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/m2m/vdr-1.7.29/PLUGINS/src/hello'
Plugin osddemo:
make[1]: Entering directory `/home/m2m/vdr-1.7.29/PLUGINS/src/osddemo'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/m2m/vdr-1.7.29/PLUGINS/src/osddemo'
Plugin pictures:
make[1]: Entering directory `/home/m2m/vdr-1.7.29/PLUGINS/src/pictures'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/m2m/vdr-1.7.29/PLUGINS/src/pictures'
Plugin rcu:
make[1]: Entering directory `/home/m2m/vdr-1.7.29/PLUGINS/src/rcu'
xgettext -C -cTRANSLATORS --no-wrap --no-location -k -ktr -ktrNOOP --package-name=vdr-rcu --package-version=0.0.2 --msgid-bugs-address='<see README>' -o po/rcu.pot rcu.c
make[1]: Leaving directory `/home/m2m/vdr-1.7.29/PLUGINS/src/rcu'
Plugin servicedemo:
make[1]: Entering directory `/home/m2m/vdr-1.7.29/PLUGINS/src/servicedemo'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/m2m/vdr-1.7.29/PLUGINS/src/servicedemo'
Plugin skincurses:
make[1]: Entering directory `/home/m2m/vdr-1.7.29/PLUGINS/src/skincurses'
g++ -g -O3 -Wall -Werror=overloaded-virtual -Wno-parentheses -fPIC -c -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"skincurses"' -I../../../include skincurses.c
skincurses.c:9:21: fatal error: ncurses.h: No such file or directory
compilation terminated.
make[1]: *** [skincurses.o] Error 1
make[1]: Leaving directory `/home/m2m/vdr-1.7.29/PLUGINS/src/skincurses'
Plugin status:
make[1]: Entering directory `/home/m2m/vdr-1.7.29/PLUGINS/src/status'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/m2m/vdr-1.7.29/PLUGINS/src/status'
Plugin svdrpdemo:
make[1]: Entering directory `/home/m2m/vdr-1.7.29/PLUGINS/src/svdrpdemo'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/m2m/vdr-1.7.29/PLUGINS/src/svdrpdemo'

*** failed plugins: skincurses

make: *** [plugins] Error 1
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 08:53 PM,
ارسال : #1322
Re: چگونگي نصب کارتهاي ماهواره(DVB)
مشکلی نیست
شما برنامه را اجرا کنید ببینیم مشکل دیگری هست یا نه؟

هر چه بيشتر مي آموزم بيشتر به ناداني خود پي مي برم
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 09:03 PM,
ارسال : #1323
Re: چگونگي نصب کارتهاي ماهواره(DVB)
استاد دستور را اجرا کردم یه پنجره با عنوان softhddevice باز شد کانال 1 سیما را پخش کرد اما صدا داره ولی تصویر خیر .صفحه سیاه هست .
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 09:15 PM,
ارسال : #1324
Re: چگونگي نصب کارتهاي ماهواره(DVB)
شما در مسیر vdr-1.7.29-configفایل متنی setup.conf را باز کنید خطوطی را که با softhddevice شروع میشود را پاک کنید و خطوط زیر را جایگزین کنید
کد :
softhddevice.1080i.CutLeftRight = 0
softhddevice.1080i.CutTopBottom = 0
softhddevice.1080i.Deinterlace = 0
softhddevice.1080i.Denoise = 0
softhddevice.1080i.InverseTelecine = 0
softhddevice.1080i.Scaling = 2
softhddevice.1080i.Sharpen = 0
softhddevice.1080i.SkipChromaDeinterlace = 0
softhddevice.1080i_fake.CutLeftRight = 0
softhddevice.1080i_fake.CutTopBottom = 0
softhddevice.1080i_fake.Deinterlace = 0
softhddevice.1080i_fake.Denoise = 0
softhddevice.1080i_fake.InverseTelecine = 0
softhddevice.1080i_fake.Scaling = 2
softhddevice.1080i_fake.Sharpen = 0
softhddevice.1080i_fake.SkipChromaDeinterlace = 0
softhddevice.576i.CutLeftRight = 0
softhddevice.576i.CutTopBottom = 0
softhddevice.576i.Deinterlace = 0
softhddevice.576i.Denoise = 0
softhddevice.576i.InverseTelecine = 0
softhddevice.576i.Scaling = 1
softhddevice.576i.Sharpen = 0
softhddevice.576i.SkipChromaDeinterlace = 0
softhddevice.60HzMode = 0
softhddevice.720p.CutLeftRight = 0
softhddevice.720p.CutTopBottom = 0
softhddevice.720p.Deinterlace = 0
softhddevice.720p.Denoise = 0
softhddevice.720p.InverseTelecine = 0
softhddevice.720p.Scaling = 2
softhddevice.720p.Sharpen = 0
softhddevice.720p.SkipChromaDeinterlace = 0
softhddevice.AudioBufferTime = 0
softhddevice.AudioCompression = 0
softhddevice.AudioDelay = 0
softhddevice.AudioDownmix = 0
softhddevice.AudioDrift = 0
softhddevice.AudioMaxCompression = 0
softhddevice.AudioMaxNormalize = 0
softhddevice.AudioNormalize = 0
softhddevice.AudioPassthrough = 0
softhddevice.AudioSoftvol = 1
softhddevice.AudioStereoDescent = 0
softhddevice.AutoCrop.Delay = 0
softhddevice.AutoCrop.Interval = 0
softhddevice.AutoCrop.Tolerance = 0
softhddevice.Background = 0
softhddevice.BlackPicture = 0
softhddevice.Brightness = 0
softhddevice.Contrast = 1000
softhddevice.HideMainMenuEntry = 0
softhddevice.Hue = 0
softhddevice.MakePrimary = 0
softhddevice.Osd.Height = 0
softhddevice.Osd.Width = 0
softhddevice.Saturation = 1000
softhddevice.SkipLines = 0
softhddevice.SoftStartSync = 1
softhddevice.StudioLevels = 0
softhddevice.Suspend.Close = 1
softhddevice.Suspend.X11 = 0
softhddevice.VideoDisplayFormat = 1
softhddevice.VideoFormat = 0

بخاطر اینکه شما اینقدر با vdr مشکل دارید خود را ملامت نکنید شما چندان با قلق اون اشنا نیستید
این برنامه تنظیمات دستی زیادی دارد ولی اگر با فوت و فن ان اشنا شوید ان را با هیچ چیز عوض نخواهید کرد!

هر چه بيشتر مي آموزم بيشتر به ناداني خود پي مي برم
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 09:21 PM,
ارسال : #1325
Re: چگونگي نصب کارتهاي ماهواره(DVB)
خوب ادرسی را فرمودید رفتم اینم خروجیش در فایل مذکور خطوطی که با softhddevice شروع بشه وجود نداره ایا باید متن شما را به فایل اضافه کنم
کد :
m2m@m2m-EP41-UD3L ~/vdr-1.7.29/config % ls
a  channels.conf  diseqc.conf  keymacros.conf  scr.conf  setup.conf  sources.conf  svdrphosts.conf  themes/
m2m@m2m-EP41-UD3L ~/vdr-1.7.29/config % cat setup.conf
AntiAlias = 1
AudioLanguages =
ChannelEntryTimeout = 1000
ChannelInfoPos = 0
ChannelInfoTime = 5
ChannelsWrap = 0
CurrentChannel = 1
CurrentDolby = 0
CurrentVolume = 255
DefaultLifetime = 99
DefaultPriority = 50
DelTimeshiftRec = 0
DeviceBondings =
DiSEqC = 0
DisplaySubtitles = 0
EmergencyExit = 1
EPGBugfixLevel = 3
EPGLanguages =
EPGLinger = 0
EPGScanTimeout = 5
FoldersInTimerMenu = 1
FontFix = Courier:Bold
FontFixSize = 16
FontFixSizeP = 0.030000
FontOsd = Sans Serif:Bold
FontOsdSize = 17
FontOsdSizeP = 0.031000
FontSml = Sans Serif
FontSmlSize = 15
FontSmlSizeP = 0.028000
InitialChannel =
InitialVolume = -1
InstantRecordTime = 180
LnbFrequHi = 10600
LnbFrequLo = 9750
LnbSLOF = 11700
MarginStart = 2
MarginStop = 10
MarkInstantRecord = 1
MaxVideoFileSize = 2000
MenuKeyCloses = 0
MenuScrollPage = 1
MenuScrollWrap = 0
MinEventTimeout = 30
MinUserInactivity = 300
MultiSpeedMode = 0
NameInstantRecord = TITLE EPISODE
NextWakeupTime = 0
NumberKeysForChars = 1
OSDAspect = 0.903704
OSDHeight = 511
OSDHeightP = 0.930000
OSDLanguage =
OSDLeft = 32
OSDLeftP = 0.030000
OSDMessageTime = 1
OSDSkin = lcars
OSDTheme = default
OSDTop = 16
OSDTopP = 0.030000
OSDWidth = 1000
OSDWidthP = 0.930000
PauseKeyHandling = 2
PauseLifetime = 1
PausePriority = 10
PrimaryDVB = 3
RecordingDirs = 1
ResumeID = 0
SetSystemTime = 0
ShowChannelNamesWithSource = 0
ShowInfoOnChSwitch = 1
ShowRemainingTime = 0
ShowReplayMode = 0
SplitEditedFiles = 0
StandardCompliance = 0
SubtitleBgTransparency = 0
SubtitleFgTransparency = 0
SubtitleLanguages =
SubtitleOffset = 0
SVDRPTimeout = 300
TimeoutRequChInfo = 1
TimeSource =
TimeTransponder = 0
UpdateChannels = 5
UseDolbyDigital = 1
UseSmallFont = 1
UseSubtitle = 1
UseVps = 0
VideoDisplayFormat = 1
VideoFormat = 0
VpsMargin = 120
ZapTimeout = 3
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 09:24 PM,
ارسال : #1326
Re: چگونگي نصب کارتهاي ماهواره(DVB)
بله دوست عزیز

هر چه بيشتر مي آموزم بيشتر به ناداني خود پي مي برم
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 09:32 PM,
ارسال : #1327
Re: چگونگي نصب کارتهاي ماهواره(DVB)
متن را به فایل مذکور اضافه کردم اما همچنان صدا دارم اما تصویر خیر
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 10:35 PM,
ارسال : #1328
Re: چگونگي نصب کارتهاي ماهواره(DVB)
کد :
apt-get install ffmpeg

کارت گرافیک شما چیه؟

هر چه بيشتر مي آموزم بيشتر به ناداني خود پي مي برم
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 10:43 PM,
ارسال : #1329
Re: چگونگي نصب کارتهاي ماهواره(DVB)
ffmpeg را نصب کردم اما فرقی نکرد . کارت گرافیک هم انویدیا مدل 9600 GT هست
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 10:52 PM,
ارسال : #1330
Re: چگونگي نصب کارتهاي ماهواره(DVB)
ایا راه انداز رسمی انویدیا نصب هست یا نه؟

هر چه بيشتر مي آموزم بيشتر به ناداني خود پي مي برم
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 11:02 PM,
ارسال : #1331
Re: چگونگي نصب کارتهاي ماهواره(DVB)
والا فکر کنم رسمی باشه راهی است که چک کنم ؟
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 11:04 PM,
ارسال : #1332
Re: چگونگي نصب کارتهاي ماهواره(DVB)
کد :
lsmod | grep -i nvidia

هر چه بيشتر مي آموزم بيشتر به ناداني خود پي مي برم
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 11:08 PM,
ارسال : #1333
Re: چگونگي نصب کارتهاي ماهواره(DVB)
این هم خروجیش
کد :
127 m2m@m2m-EP41-UD3L ~ % lsmod | grep -i nvidia
nvidia              11262536  50
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 11:13 PM,
ارسال : #1334
Re: چگونگي نصب کارتهاي ماهواره(DVB)
کد :
cd vdr-1.7.29/PLUGINNS/src/vdr-plugin-softhddevice
make clean
git pull
make
cd ../../..
./vdr -c config -v video -Psofthddevice

هر چه بيشتر مي آموزم بيشتر به ناداني خود پي مي برم
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-17, 11:24 PM,
ارسال : #1335
Re: چگونگي نصب کارتهاي ماهواره(DVB)
کلیه دستورات اجرا گردید و خروجی زیر حاصل شد . همچنان تصویر ندارم اما صدا هست
کد :
m2m@m2m-EP41-UD3L ...29/PLUGINS/src/vdr-plugin-softhddevice (git)-[master] % make clean
m2m@m2m-EP41-UD3L ...29/PLUGINS/src/vdr-plugin-softhddevice (git)-[master] % git pull
Already up-to-date.
m2m@m2m-EP41-UD3L ...29/PLUGINS/src/vdr-plugin-softhddevice (git)-[master] % make
g++ -g -O2 -W -Wall -Wextra -Werror=overloaded-virtual -fPIC -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE  -DAV_INFO -DAV_INFO_TIME=3000       -DUSE_ALSA -DUSE_OSS -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"softhddevice"'  -DGIT_REV='"f640ebd"' -I../../../include   `pkg-config --cflags x11 x11-xcb xcb xcb-xv xcb-shm xcb-dpms xcb-atom xcb-screensaver xcb-randr xcb-glx xcb-icccm xcb-keysyms` `pkg-config --cflags gl glu`    `pkg-config --cflags alsa`   -c -o softhddevice.o softhddevice.cpp
softhddevice.cpp:23:27: fatal error: vdr/interface.h: No such file or directory
compilation terminated.
make: *** [softhddevice.o] Error 1
2 m2m@m2m-EP41-UD3L ...29/PLUGINS/src/vdr-plugin-softhddevice (git)-[master] % cd ../../..
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-18, 03:53 PM,
ارسال : #1336
Re: چگونگي نصب کارتهاي ماهواره(DVB)
این خروجی دستور cat /var/log/syslog | grep vdr
کد :
Oct 18 14:04:54 m2m-EP41-UD3L vdr: [5820] OSD size changed to 1440x818 @ 1.00988
Oct 18 14:04:54 m2m-EP41-UD3L vdr: [5834] changing pids of channel 18 from 0+0=0:1601=per@4:0:0 to 0+0=0:1601=per@17:0:0
Oct 18 14:04:54 m2m-EP41-UD3L vdr: [5834] changing pids of channel 19 from 0+0=0:1611=per@4:0:0 to 0+0=0:1611=per@17:0:0
Oct 18 14:04:54 m2m-EP41-UD3L vdr: [5834] changing pids of channel 20 from 0+0=0:1621=per@4:0:0 to 0+0=0:1621=per@17:0:0
Oct 18 14:04:54 m2m-EP41-UD3L vdr: [5834] changing pids of channel 21 from 0+0=0:1631=per@4:0:0 to 0+0=0:1631=per@17:0:0
Oct 18 14:04:54 m2m-EP41-UD3L vdr: [5834] changing pids of channel 22 from 0+0=0:1641=per@4:0:0 to 0+0=0:1641=per@17:0:0
Oct 18 14:04:54 m2m-EP41-UD3L vdr: [5834] changing pids of channel 23 from 0+0=0:1651=per@4:0:0 to 0+0=0:1651=per@17:0:0
Oct 18 14:17:50 m2m-EP41-UD3L vdr: [5820] OSD size changed to 1440x900 @ 1.11111
Oct 18 14:17:51 m2m-EP41-UD3L vdr: [5820] OSD size changed to 1440x818 @ 1.00988
Oct 18 14:35:15 m2m-EP41-UD3L vdr: [5820] stopping plugin: softhddevice
Oct 18 14:35:15 m2m-EP41-UD3L vdr: [5820] [softhddev]SetPlayMode: 0
Oct 18 14:35:15 m2m-EP41-UD3L vdr: [5820] [softhddev]SetVideoDisplayFormat: 1
Oct 18 14:35:15 m2m-EP41-UD3L vdr: [5858] KBD remote control thread ended (pid=5820, tid=5858)
Oct 18 14:35:15 m2m-EP41-UD3L vdr: [5820] saved setup to config/setup.conf
Oct 18 14:35:15 m2m-EP41-UD3L vdr: [5867] TS buffer on device 2 thread ended (pid=5820, tid=5867)
Oct 18 14:35:16 m2m-EP41-UD3L vdr: [5866] buffer stats: 57716 (2%) used
Oct 18 14:35:16 m2m-EP41-UD3L vdr: [5866] receiver on device 2 thread ended (pid=5820, tid=5866)
Oct 18 14:35:16 m2m-EP41-UD3L vdr: [5827] section handler thread ended (pid=5820, tid=5827)
Oct 18 14:35:16 m2m-EP41-UD3L vdr: [5826] tuner on frontend 0/0 thread ended (pid=5820, tid=5826)
Oct 18 14:35:16 m2m-EP41-UD3L vdr: [5834] section handler thread ended (pid=5820, tid=5834)
Oct 18 14:35:16 m2m-EP41-UD3L vdr: [5833] tuner on frontend 1/0 thread ended (pid=5820, tid=5833)
Oct 18 14:35:16 m2m-EP41-UD3L vdr: [5820] deleting plugin: softhddevice
Oct 18 14:35:16 m2m-EP41-UD3L vdr: [5820] caught signal 2
Oct 18 14:35:16 m2m-EP41-UD3L vdr: [5820] exiting, exit code 0
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] VDR version 1.7.29 started
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] codeset is 'UTF-8' - known
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] found 28 locales in ./locale
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] loading plugin: ./PLUGINS/lib/libvdr-softhddevice.so.1.7.29
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] loading config/setup.conf
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] ERROR: unknown config parameter: softhddevice.SkipLines = 0
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] ERROR: unknown config parameter: softhddevice.VideoDisplayFormat = 1
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] ERROR: unknown config parameter: softhddevice.VideoFormat = 0
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] loading config/sources.conf
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] loading config/diseqc.conf
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] loading config/scr.conf
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] loading config/channels.conf
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] loading config/timers.conf
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] loading config/svdrphosts.conf
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] loading config/keymacros.conf
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] registered source parameters for 'A - ATSC'
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6746] video directory scanner thread started (pid=6745, tid=6746)
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6746] video directory scanner thread ended (pid=6745, tid=6746)
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] registered source parameters for 'C - DVB-C'
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6747] video directory scanner thread started (pid=6745, tid=6747)
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6747] video directory scanner thread ended (pid=6745, tid=6747)
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6748] epg data reader thread started (pid=6745, tid=6748)
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6748] reading EPG data from video/epg.data
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6748] epg data reader thread ended (pid=6745, tid=6748)
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] registered source parameters for 'S - DVB-S'
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] registered source parameters for 'T - DVB-T'
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] probing /dev/dvb/adapter0/frontend0
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] creating cDvbDevice
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] new device number 1
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] frontend 0/0 provides DVB-S,DVB-S2 with QPSK ("Conexant CX24116/CX24118")
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6753] section handler thread started (pid=6745, tid=6753)
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6752] tuner on frontend 0/0 thread started (pid=6745, tid=6752)
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6752] cTimeMs: using monotonic clock (resolution is 1 ns)
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] probing /dev/dvb/adapter1/frontend0
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] creating cDvbDevice
Oct 18 15:01:05 m2m-EP41-UD3L vdr: [6745] new device number 2
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] frontend 1/0 provides DVB-T with QPSK,QAM16,QAM64 ("Zarlink ZL10353 DVB-T")
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6760] tuner on frontend 1/0 thread started (pid=6745, tid=6760)
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] found 2 DVB devices
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6761] section handler thread started (pid=6745, tid=6761)
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] initializing plugin: softhddevice (0.5.2-GITf640ebd): A software and GPU emulated HD device
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] new device number 9
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] setting primary device to 3
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] [softhddev]MakePrimaryDevice: 1
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] [softhddev]SetVideoFormat: 0
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] [softhddev]SetVideoDisplayFormat: 1
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] [softhddev]SetVolumeDevice: 255
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] assuming manual start of VDR
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] SVDRP listening on port 6419
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] setting current skin to "lcars"
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] loading config/themes/lcars-default.theme
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] starting plugin: softhddevice
Oct 18 15:01:06 m2m-EP41-UD3L vdr: audio: 'alsa' output module used
Oct 18 15:01:06 m2m-EP41-UD3L vdr: audio/alsa: supports pause: yes
Oct 18 15:01:06 m2m-EP41-UD3L vdr: audio:  44100Hz supports 1 2 3 4 5 6 7 8 channels
Oct 18 15:01:06 m2m-EP41-UD3L vdr: audio:  48000Hz supports 1 2 3 4 5 6 7 8 channels
Oct 18 15:01:06 m2m-EP41-UD3L vdr: video/noop: noop driver running on display ':0.0'
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [softhddev] ready
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6745] remote control KBD - learning keys
Oct 18 15:01:06 m2m-EP41-UD3L vdr: [6781] KBD remote control thread started (pid=6745, tid=6781)
Oct 18 15:01:16 m2m-EP41-UD3L vdr: [6745] switching to channel 1
Oct 18 15:01:16 m2m-EP41-UD3L vdr: [6745] [softhddev]SetVolumeDevice: 255
Oct 18 15:01:16 m2m-EP41-UD3L vdr: [6870] receiver on device 2 thread started (pid=6745, tid=6870)
Oct 18 15:01:16 m2m-EP41-UD3L vdr: [6745] [softhddev]SetPlayMode: 1
Oct 18 15:01:16 m2m-EP41-UD3L vdr: [6871] TS buffer on device 2 thread started (pid=6745, tid=6871)
Oct 18 15:01:16 m2m-EP41-UD3L vdr: [6745] OSD size changed to 1440x818 @ 1.00988
Oct 18 15:01:17 m2m-EP41-UD3L vdr: codec: latm
Oct 18 15:01:18  vdr: last message repeated 6 times
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 1 from 0-0-101-0 to 3622-101-101-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 2 from 0-0-102-0 to 3622-101-102-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 3 from 0-0-103-0 to 3622-101-103-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 4 from 0-0-104-0 to 3622-101-104-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 5 from 0-0-105-0 to 3622-101-105-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 6 from 0-0-106-0 to 3622-101-106-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 7 from 0-0-107-0 to 3622-101-107-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 8 from 0-0-108-0 to 3622-101-108-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 9 from 0-0-151-0 to 3622-101-151-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 10 from 0-0-152-0 to 3622-101-152-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 11 from 0-0-153-0 to 3622-101-153-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 12 from 0-0-154-0 to 3622-101-154-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 13 from 0-0-155-0 to 3622-101-155-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 14 from 0-0-156-0 to 3622-101-156-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 15 from 0-0-157-0 to 3622-101-157-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 16 from 0-0-158-0 to 3622-101-158-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 17 from 0-0-159-0 to 3622-101-159-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 18 from 0-0-160-0 to 3622-101-160-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 19 from 0-0-161-0 to 3622-101-161-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 20 from 0-0-162-0 to 3622-101-162-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 21 from 0-0-163-0 to 3622-101-163-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 22 from 0-0-164-0 to 3622-101-164-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: [6761] changing id of channel 23 from 0-0-165-0 to 3622-101-165-0
Oct 18 15:01:18 m2m-EP41-UD3L vdr: codec: latm
Oct 18 15:01:18  vdr: last message repeated 9 times
Oct 18 15:01:18 m2m-EP41-UD3L vdr: audio/alsa: using device 'default'
Oct 18 15:01:18 m2m-EP41-UD3L vdr: audio/alsa: start delay 336ms
Oct 18 15:18:08 m2m-EP41-UD3L vdr: [6782] [softhddev]FeedKeyPress: remote 'XKeySym' not found
Oct 18 15:18:17 m2m-EP41-UD3L vdr: [6745] OSD size changed to 1440x900 @ 1.11111
Oct 18 15:18:19 m2m-EP41-UD3L vdr: audio/alsa: avail underrun error? 'Broken pipe'
Oct 18 15:18:34 m2m-EP41-UD3L vdr: [6745] stopping plugin: softhddevice
Oct 18 15:18:34 m2m-EP41-UD3L vdr: [6745] [softhddev]SetPlayMode: 0
Oct 18 15:18:34 m2m-EP41-UD3L vdr: [6745] [softhddev]SetVideoDisplayFormat: 1
Oct 18 15:18:34 m2m-EP41-UD3L vdr: [6781] KBD remote control thread ended (pid=6745, tid=6781)
Oct 18 15:18:34 m2m-EP41-UD3L vdr: [6745] saved setup to config/setup.conf
Oct 18 15:18:34 m2m-EP41-UD3L vdr: [6871] TS buffer on device 2 thread ended (pid=6745, tid=6871)
Oct 18 15:18:34 m2m-EP41-UD3L vdr: [6870] buffer stats: 51700 (2%) used
Oct 18 15:18:34 m2m-EP41-UD3L vdr: [6870] receiver on device 2 thread ended (pid=6745, tid=6870)
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6753] section handler thread ended (pid=6745, tid=6753)
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6752] tuner on frontend 0/0 thread ended (pid=6745, tid=6752)
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6761] section handler thread ended (pid=6745, tid=6761)
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6760] tuner on frontend 1/0 thread ended (pid=6745, tid=6760)
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] deleting plugin: softhddevice
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] =====================
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] EPG bugfix statistics
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] =====================
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] IF SOMEBODY WHO IS IN CHARGE OF THE EPG DATA FOR ONE OF THE LISTED
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] CHANNELS READS THIS: PLEASE TAKE A LOOK AT THE FUNCTION cEvent::FixEpgBugs()
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] IN VDR/epg.c TO LEARN WHAT'S WRONG WITH YOUR DATA, AND FIX IT!
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] =====================
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] Fix Hits Channels
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] 6   12   IRIB-TV5
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] 7   196  IRIB QURAN, IRIB-TV4, IRIB-TV5
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] =====================
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] caught signal 2
Oct 18 15:18:35 m2m-EP41-UD3L vdr: [6745] exiting, exit code 0
Oct 18 15:29:42 m2m-EP41-UD3L vdr: [7085] ERROR (tools.c,346): O: No such file or directory
Oct 18 15:29:52 m2m-EP41-UD3L vdr: [7096] ERROR (tools.c,346): o: No such file or directory
Oct 18 15:30:01 m2m-EP41-UD3L vdr: [7107] ERROR (tools.c,346): /video: No such file or directory
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] VDR version 1.7.29 started
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] codeset is 'UTF-8' - known
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] found 28 locales in ./locale
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] loading plugin: ./PLUGINS/lib/libvdr-softhddevice.so.1.7.29
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] loading config/setup.conf
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] ERROR: unknown config parameter: softhddevice.SkipLines = 0
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] ERROR: unknown config parameter: softhddevice.VideoDisplayFormat = 1
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] ERROR: unknown config parameter: softhddevice.VideoFormat = 0
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] loading config/sources.conf
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] loading config/diseqc.conf
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] loading config/scr.conf
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] loading config/channels.conf
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] loading config/timers.conf
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] loading config/svdrphosts.conf
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] loading config/keymacros.conf
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] registered source parameters for 'A - ATSC'
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7120] video directory scanner thread started (pid=7118, tid=7120)
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7120] video directory scanner thread ended (pid=7118, tid=7120)
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] registered source parameters for 'C - DVB-C'
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] registered source parameters for 'S - DVB-S'
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] registered source parameters for 'T - DVB-T'
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] probing /dev/dvb/adapter0/frontend0
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] creating cDvbDevice
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] new device number 1
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7121] epg data reader thread started (pid=7118, tid=7121)
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7121] reading EPG data from video/epg.data
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7121] epg data reader thread ended (pid=7118, tid=7121)
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7119] video directory scanner thread started (pid=7118, tid=7119)
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7119] video directory scanner thread ended (pid=7118, tid=7119)
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] frontend 0/0 provides DVB-S,DVB-S2 with QPSK ("Conexant CX24116/CX24118")
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7125] section handler thread started (pid=7118, tid=7125)
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7124] tuner on frontend 0/0 thread started (pid=7118, tid=7124)
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7124] cTimeMs: using monotonic clock (resolution is 1 ns)
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] probing /dev/dvb/adapter1/frontend0
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] creating cDvbDevice
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] new device number 2
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] frontend 1/0 provides DVB-T with QPSK,QAM16,QAM64 ("Zarlink ZL10353 DVB-T")
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] found 2 DVB devices
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] initializing plugin: softhddevice (0.5.2-GITf640ebd): A software and GPU emulated HD device
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] new device number 9
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] setting primary device to 3
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] [softhddev]MakePrimaryDevice: 1
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] [softhddev]SetVideoFormat: 0
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] [softhddev]SetVideoDisplayFormat: 1
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] [softhddev]SetVolumeDevice: 255
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] assuming manual start of VDR
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] SVDRP listening on port 6419
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] setting current skin to "lcars"
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] loading config/themes/lcars-default.theme
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] starting plugin: softhddevice
Oct 18 15:30:18 m2m-EP41-UD3L vdr: audio: 'alsa' output module used
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7130] tuner on frontend 1/0 thread started (pid=7118, tid=7130)
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7131] section handler thread started (pid=7118, tid=7131)
Oct 18 15:30:18 m2m-EP41-UD3L vdr: audio/alsa: supports pause: yes
Oct 18 15:30:18 m2m-EP41-UD3L vdr: audio:  44100Hz supports 1 2 3 4 5 6 7 8 channels
Oct 18 15:30:18 m2m-EP41-UD3L vdr: audio:  48000Hz supports 1 2 3 4 5 6 7 8 channels
Oct 18 15:30:18 m2m-EP41-UD3L vdr: video/noop: noop driver running on display ':0.0'
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [softhddev] ready
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7118] remote control KBD - learning keys
Oct 18 15:30:18 m2m-EP41-UD3L vdr: [7152] KBD remote control thread started (pid=7118, tid=7152)
Oct 18 15:30:28 m2m-EP41-UD3L vdr: [7118] switching to channel 1
Oct 18 15:30:28 m2m-EP41-UD3L vdr: [7118] [softhddev]SetVolumeDevice: 255
Oct 18 15:30:28 m2m-EP41-UD3L vdr: [7118] [softhddev]SetPlayMode: 1
Oct 18 15:30:28 m2m-EP41-UD3L vdr: [7162] receiver on device 2 thread started (pid=7118, tid=7162)
Oct 18 15:30:28 m2m-EP41-UD3L vdr: [7118] OSD size changed to 1440x818 @ 1.00988
Oct 18 15:30:28 m2m-EP41-UD3L vdr: [7163] TS buffer on device 2 thread started (pid=7118, tid=7163)
Oct 18 15:30:30 m2m-EP41-UD3L vdr: codec: latm
Oct 18 15:30:30  vdr: last message repeated 2 times
Oct 18 15:30:30 m2m-EP41-UD3L vdr: audio/alsa: using device 'default'
Oct 18 15:30:30 m2m-EP41-UD3L vdr: audio/alsa: start delay 336ms
Oct 18 15:32:41 m2m-EP41-UD3L vdr: [7118] OSD size changed to 1440x900 @ 1.11111
Oct 18 15:32:42 m2m-EP41-UD3L vdr: [7118] OSD size changed to 1440x818 @ 1.00988
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] stopping plugin: softhddevice
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] [softhddev]SetPlayMode: 0
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] [softhddev]SetVideoDisplayFormat: 1
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7152] KBD remote control thread ended (pid=7118, tid=7152)
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7163] TS buffer on device 2 thread ended (pid=7118, tid=7163)
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] saved setup to config/setup.conf
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7162] buffer stats: 41736 (1%) used
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7162] receiver on device 2 thread ended (pid=7118, tid=7162)
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7125] section handler thread ended (pid=7118, tid=7125)
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7124] tuner on frontend 0/0 thread ended (pid=7118, tid=7124)
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7131] section handler thread ended (pid=7118, tid=7131)
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7130] tuner on frontend 1/0 thread ended (pid=7118, tid=7130)
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] deleting plugin: softhddevice
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] =====================
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] EPG bugfix statistics
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] =====================
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] IF SOMEBODY WHO IS IN CHARGE OF THE EPG DATA FOR ONE OF THE LISTED
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] CHANNELS READS THIS: PLEASE TAKE A LOOK AT THE FUNCTION cEvent::FixEpgBugs()
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] IN VDR/epg.c TO LEARN WHAT'S WRONG WITH YOUR DATA, AND FIX IT!
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] =====================
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] Fix Hits Channels
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] 6   12   IRIB-TV5
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] 7   193  IRIB-TV4, IRIB-TV5, IRIB QURAN
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] =====================
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] caught signal 2
Oct 18 15:34:27 m2m-EP41-UD3L vdr: [7118] exiting, exit code 0
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] VDR version 1.7.29 started
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] codeset is 'UTF-8' - known
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] found 28 locales in ./locale
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] loading plugin: ./PLUGINS/lib/libvdr-softhddevice.so.1.7.29
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] loading config/setup.conf
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] ERROR: unknown config parameter: softhddevice.SkipLines = 0
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] ERROR: unknown config parameter: softhddevice.VideoDisplayFormat = 1
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] ERROR: unknown config parameter: softhddevice.VideoFormat = 0
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] loading config/sources.conf
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] loading config/diseqc.conf
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] loading config/scr.conf
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] loading config/channels.conf
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] loading config/timers.conf
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] loading config/svdrphosts.conf
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] loading config/keymacros.conf
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] registered source parameters for 'A - ATSC'
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] registered source parameters for 'C - DVB-C'
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] registered source parameters for 'S - DVB-S'
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] registered source parameters for 'T - DVB-T'
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] probing /dev/dvb/adapter0/frontend0
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] creating cDvbDevice
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] new device number 1
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7411] epg data reader thread started (pid=7408, tid=7411)
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7411] reading EPG data from video/epg.data
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7410] video directory scanner thread started (pid=7408, tid=7410)
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7410] video directory scanner thread ended (pid=7408, tid=7410)
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7411] epg data reader thread ended (pid=7408, tid=7411)
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7409] video directory scanner thread started (pid=7408, tid=7409)
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7409] video directory scanner thread ended (pid=7408, tid=7409)
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] frontend 0/0 provides DVB-S,DVB-S2 with QPSK ("Conexant CX24116/CX24118")
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7415] section handler thread started (pid=7408, tid=7415)
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7414] tuner on frontend 0/0 thread started (pid=7408, tid=7414)
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7414] cTimeMs: using monotonic clock (resolution is 1 ns)
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] probing /dev/dvb/adapter1/frontend0
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] creating cDvbDevice
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] new device number 2
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] frontend 1/0 provides DVB-T with QPSK,QAM16,QAM64 ("Zarlink ZL10353 DVB-T")
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] found 2 DVB devices
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] initializing plugin: softhddevice (0.5.2-GITf640ebd): A software and GPU emulated HD device
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] new device number 9
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] setting primary device to 3
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] [softhddev]MakePrimaryDevice: 1
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] [softhddev]SetVideoFormat: 0
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] [softhddev]SetVideoDisplayFormat: 1
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] [softhddev]SetVolumeDevice: 255
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] assuming manual start of VDR
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] SVDRP listening on port 6419
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] setting current skin to "lcars"
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] loading config/themes/lcars-default.theme
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7408] starting plugin: softhddevice
Oct 18 15:38:38 m2m-EP41-UD3L vdr: audio: 'alsa' output module used
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7424] section handler thread started (pid=7408, tid=7424)
Oct 18 15:38:38 m2m-EP41-UD3L vdr: [7423] tuner on frontend 1/0 thread started (pid=7408, tid=7423)
Oct 18 15:38:38 m2m-EP41-UD3L vdr: audio/alsa: supports pause: yes
Oct 18 15:38:39 m2m-EP41-UD3L vdr: audio:  44100Hz supports 1 2 3 4 5 6 7 8 channels
Oct 18 15:38:39 m2m-EP41-UD3L vdr: audio:  48000Hz supports 1 2 3 4 5 6 7 8 channels
Oct 18 15:38:39 m2m-EP41-UD3L vdr: video/noop: noop driver running on display ':0.0'
Oct 18 15:38:39 m2m-EP41-UD3L vdr: [softhddev] ready
Oct 18 15:38:39 m2m-EP41-UD3L vdr: [7408] remote control KBD - learning keys
Oct 18 15:38:39 m2m-EP41-UD3L vdr: [7450] KBD remote control thread started (pid=7408, tid=7450)
Oct 18 15:38:49 m2m-EP41-UD3L vdr: [7408] switching to channel 1
Oct 18 15:38:49 m2m-EP41-UD3L vdr: [7408] [softhddev]SetVolumeDevice: 255
Oct 18 15:38:49 m2m-EP41-UD3L vdr: [7453] receiver on device 2 thread started (pid=7408, tid=7453)
Oct 18 15:38:49 m2m-EP41-UD3L vdr: [7408] [softhddev]SetPlayMode: 1
Oct 18 15:38:49 m2m-EP41-UD3L vdr: [7454] TS buffer on device 2 thread started (pid=7408, tid=7454)
Oct 18 15:38:49 m2m-EP41-UD3L vdr: [7408] OSD size changed to 1440x818 @ 1.00988
Oct 18 15:38:50 m2m-EP41-UD3L vdr: audio/alsa: using device 'default'
Oct 18 15:38:50 m2m-EP41-UD3L vdr: audio/alsa: start delay 336ms
Oct 18 15:40:01 m2m-EP41-UD3L vdr: [7451] [softhddev]FeedKeyPress: remote 'XKeySym' not found
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] stopping plugin: softhddevice
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] [softhddev]SetPlayMode: 0
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] [softhddev]SetVideoDisplayFormat: 1
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7450] KBD remote control thread ended (pid=7408, tid=7450)
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] saved setup to config/setup.conf
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7454] TS buffer on device 2 thread ended (pid=7408, tid=7454)
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7453] buffer stats: 53768 (2%) used
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7453] receiver on device 2 thread ended (pid=7408, tid=7453)
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7415] section handler thread ended (pid=7408, tid=7415)
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7414] tuner on frontend 0/0 thread ended (pid=7408, tid=7414)
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7424] section handler thread ended (pid=7408, tid=7424)
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7423] tuner on frontend 1/0 thread ended (pid=7408, tid=7423)
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] deleting plugin: softhddevice
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] =====================
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] EPG bugfix statistics
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] =====================
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] IF SOMEBODY WHO IS IN CHARGE OF THE EPG DATA FOR ONE OF THE LISTED
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] CHANNELS READS THIS: PLEASE TAKE A LOOK AT THE FUNCTION cEvent::FixEpgBugs()
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] IN VDR/epg.c TO LEARN WHAT'S WRONG WITH YOUR DATA, AND FIX IT!
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] =====================
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] Fix Hits Channels
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] 6   12   IRIB-TV5
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] 7   195  IRIB QURAN, IRIB-TV4, IRIB-TV5
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] =====================
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] caught signal 2
Oct 18 15:42:58 m2m-EP41-UD3L vdr: [7408] exiting, exit code 0
Oct 18 15:43:03 m2m-EP41-UD3L vdr: [7504] ERROR (tools.c,346): /videoteca/v0: No such file or directory
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] VDR version 1.7.29 started
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] codeset is 'UTF-8' - known
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] found 28 locales in ./locale
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] loading plugin: ./PLUGINS/lib/libvdr-softhddevice.so.1.7.29
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] loading config/setup.conf
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] ERROR: unknown config parameter: softhddevice.SkipLines = 0
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] ERROR: unknown config parameter: softhddevice.VideoDisplayFormat = 1
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] ERROR: unknown config parameter: softhddevice.VideoFormat = 0
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] loading config/sources.conf
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] loading config/diseqc.conf
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] loading config/scr.conf
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] loading config/channels.conf
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] loading config/timers.conf
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] loading config/svdrphosts.conf
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] loading config/keymacros.conf
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] registered source parameters for 'A - ATSC'
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] registered source parameters for 'C - DVB-C'
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] registered source parameters for 'S - DVB-S'
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] registered source parameters for 'T - DVB-T'
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] probing /dev/dvb/adapter0/frontend0
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] creating cDvbDevice
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] new device number 1
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7518] epg data reader thread started (pid=7515, tid=7518)
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7518] reading EPG data from video/epg.data
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7518] epg data reader thread ended (pid=7515, tid=7518)
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7517] video directory scanner thread started (pid=7515, tid=7517)
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7517] video directory scanner thread ended (pid=7515, tid=7517)
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7516] video directory scanner thread started (pid=7515, tid=7516)
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7516] video directory scanner thread ended (pid=7515, tid=7516)
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] frontend 0/0 provides DVB-S,DVB-S2 with QPSK ("Conexant CX24116/CX24118")
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7522] section handler thread started (pid=7515, tid=7522)
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7521] tuner on frontend 0/0 thread started (pid=7515, tid=7521)
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7521] cTimeMs: using monotonic clock (resolution is 1 ns)
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] probing /dev/dvb/adapter1/frontend0
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] creating cDvbDevice
Oct 18 15:43:07 m2m-EP41-UD3L vdr: [7515] new device number 2
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] frontend 1/0 provides DVB-T with QPSK,QAM16,QAM64 ("Zarlink ZL10353 DVB-T")
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] found 2 DVB devices
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] initializing plugin: softhddevice (0.5.2-GITf640ebd): A software and GPU emulated HD device
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] new device number 9
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] setting primary device to 3
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] [softhddev]MakePrimaryDevice: 1
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] [softhddev]SetVideoFormat: 0
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] [softhddev]SetVideoDisplayFormat: 1
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] [softhddev]SetVolumeDevice: 255
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] assuming manual start of VDR
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] SVDRP listening on port 6419
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] setting current skin to "lcars"
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] loading config/themes/lcars-default.theme
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] starting plugin: softhddevice
Oct 18 15:43:08 m2m-EP41-UD3L vdr: audio: 'alsa' output module used
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7527] tuner on frontend 1/0 thread started (pid=7515, tid=7527)
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7528] section handler thread started (pid=7515, tid=7528)
Oct 18 15:43:08 m2m-EP41-UD3L vdr: audio/alsa: supports pause: yes
Oct 18 15:43:08 m2m-EP41-UD3L vdr: audio:  44100Hz supports 1 2 3 4 5 6 7 8 channels
Oct 18 15:43:08 m2m-EP41-UD3L vdr: audio:  48000Hz supports 1 2 3 4 5 6 7 8 channels
Oct 18 15:43:08 m2m-EP41-UD3L vdr: video/noop: noop driver running on display ':0.0'
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [softhddev] ready
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7515] remote control KBD - learning keys
Oct 18 15:43:08 m2m-EP41-UD3L vdr: [7549] KBD remote control thread started (pid=7515, tid=7549)
Oct 18 15:43:18 m2m-EP41-UD3L vdr: [7515] switching to channel 1
Oct 18 15:43:18 m2m-EP41-UD3L vdr: [7515] [softhddev]SetVolumeDevice: 255
Oct 18 15:43:18 m2m-EP41-UD3L vdr: [7559] receiver on device 2 thread started (pid=7515, tid=7559)
Oct 18 15:43:18 m2m-EP41-UD3L vdr: [7515] [softhddev]SetPlayMode: 1
Oct 18 15:43:18 m2m-EP41-UD3L vdr: [7560] TS buffer on device 2 thread started (pid=7515, tid=7560)
Oct 18 15:43:18 m2m-EP41-UD3L vdr: [7515] OSD size changed to 1440x818 @ 1.00988
Oct 18 15:43:19 m2m-EP41-UD3L vdr: codec: latm
Oct 18 15:43:20  vdr: last message repeated 18 times
Oct 18 15:43:20 m2m-EP41-UD3L vdr: audio/alsa: using device 'default'
Oct 18 15:43:20 m2m-EP41-UD3L vdr: audio/alsa: start delay 336ms
Oct 18 15:48:54 m2m-EP41-UD3L vdr: [7515] stopping plugin: softhddevice
Oct 18 15:48:54 m2m-EP41-UD3L vdr: [7515] [softhddev]SetPlayMode: 0
Oct 18 15:48:54 m2m-EP41-UD3L vdr: [7515] [softhddev]SetVideoDisplayFormat: 1
Oct 18 15:48:54 m2m-EP41-UD3L vdr: [7549] KBD remote control thread ended (pid=7515, tid=7549)
Oct 18 15:48:54 m2m-EP41-UD3L vdr: [7515] saved setup to config/setup.conf
Oct 18 15:48:54 m2m-EP41-UD3L vdr: [7560] TS buffer on device 2 thread ended (pid=7515, tid=7560)
Oct 18 15:48:54 m2m-EP41-UD3L vdr: [7559] buffer stats: 53956 (2%) used
Oct 18 15:48:54 m2m-EP41-UD3L vdr: [7559] receiver on device 2 thread ended (pid=7515, tid=7559)
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7522] section handler thread ended (pid=7515, tid=7522)
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7521] tuner on frontend 0/0 thread ended (pid=7515, tid=7521)
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7528] section handler thread ended (pid=7515, tid=7528)
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7527] tuner on frontend 1/0 thread ended (pid=7515, tid=7527)
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] deleting plugin: softhddevice
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] =====================
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] EPG bugfix statistics
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] =====================
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] IF SOMEBODY WHO IS IN CHARGE OF THE EPG DATA FOR ONE OF THE LISTED
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] CHANNELS READS THIS: PLEASE TAKE A LOOK AT THE FUNCTION cEvent::FixEpgBugs()
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] IN VDR/epg.c TO LEARN WHAT'S WRONG WITH YOUR DATA, AND FIX IT!
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] =====================
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] Fix Hits Channels
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] 6   12   IRIB-TV5
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] 7   192  IRIB QURAN, IRIB-TV4, IRIB-TV5
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] =====================
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] caught signal 2
Oct 18 15:48:55 m2m-EP41-UD3L vdr: [7515] exiting, exit code 0
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] VDR version 1.7.29 started
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] codeset is 'UTF-8' - known
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] found 28 locales in ./locale
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] loading plugin: ./PLUGINS/lib/libvdr-softhddevice.so.1.7.29
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] loading config/setup.conf
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] ERROR: unknown config parameter: softhddevice.SkipLines = 0
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] ERROR: unknown config parameter: softhddevice.VideoDisplayFormat = 1
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] ERROR: unknown config parameter: softhddevice.VideoFormat = 0
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] loading config/sources.conf
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] loading config/diseqc.conf
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] loading config/scr.conf
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] loading config/channels.conf
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] loading config/timers.conf
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] loading config/svdrphosts.conf
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] loading config/keymacros.conf
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] registered source parameters for 'A - ATSC'
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] registered source parameters for 'C - DVB-C'
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] registered source parameters for 'S - DVB-S'
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] registered source parameters for 'T - DVB-T'
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] probing /dev/dvb/adapter0/frontend0
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] creating cDvbDevice
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] new device number 1
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7665] epg data reader thread started (pid=7662, tid=7665)
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7665] reading EPG data from video/epg.data
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7665] epg data reader thread ended (pid=7662, tid=7665)
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7664] video directory scanner thread started (pid=7662, tid=7664)
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7664] video directory scanner thread ended (pid=7662, tid=7664)
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7663] video directory scanner thread started (pid=7662, tid=7663)
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7663] video directory scanner thread ended (pid=7662, tid=7663)
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] frontend 0/0 provides DVB-S,DVB-S2 with QPSK ("Conexant CX24116/CX24118")
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7669] tuner on frontend 0/0 thread started (pid=7662, tid=7669)
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7669] cTimeMs: using monotonic clock (resolution is 1 ns)
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7670] section handler thread started (pid=7662, tid=7670)
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] probing /dev/dvb/adapter1/frontend0
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] creating cDvbDevice
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] new device number 2
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] frontend 1/0 provides DVB-T with QPSK,QAM16,QAM64 ("Zarlink ZL10353 DVB-T")
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] found 2 DVB devices
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] initializing plugin: softhddevice (0.5.2-GITf640ebd): A software and GPU emulated HD device
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] new device number 9
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] setting primary device to 3
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] [softhddev]MakePrimaryDevice: 1
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] [softhddev]SetVideoFormat: 0
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] [softhddev]SetVideoDisplayFormat: 1
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] [softhddev]SetVolumeDevice: 255
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] assuming manual start of VDR
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] SVDRP listening on port 6419
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] setting current skin to "lcars"
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7675] tuner on frontend 1/0 thread started (pid=7662, tid=7675)
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7676] section handler thread started (pid=7662, tid=7676)
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] loading config/themes/lcars-default.theme
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] starting plugin: softhddevice
Oct 18 15:49:41 m2m-EP41-UD3L vdr: audio: 'alsa' output module used
Oct 18 15:49:41 m2m-EP41-UD3L vdr: audio/alsa: supports pause: yes
Oct 18 15:49:41 m2m-EP41-UD3L vdr: audio:  44100Hz supports 1 2 3 4 5 6 7 8 channels
Oct 18 15:49:41 m2m-EP41-UD3L vdr: audio:  48000Hz supports 1 2 3 4 5 6 7 8 channels
Oct 18 15:49:41 m2m-EP41-UD3L vdr: video/noop: noop driver running on display ':0.0'
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [softhddev] ready
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7662] remote control KBD - learning keys
Oct 18 15:49:41 m2m-EP41-UD3L vdr: [7704] KBD remote control thread started (pid=7662, tid=7704)
Oct 18 15:49:51 m2m-EP41-UD3L vdr: [7662] switching to channel 1
Oct 18 15:49:51 m2m-EP41-UD3L vdr: [7662] [softhddev]SetVolumeDevice: 255
Oct 18 15:49:51 m2m-EP41-UD3L vdr: [7662] [softhddev]SetPlayMode: 1
Oct 18 15:49:51 m2m-EP41-UD3L vdr: [7708] receiver on device 2 thread started (pid=7662, tid=7708)
Oct 18 15:49:51 m2m-EP41-UD3L vdr: [7709] TS buffer on device 2 thread started (pid=7662, tid=7709)
Oct 18 15:49:51 m2m-EP41-UD3L vdr: [7662] OSD size changed to 1440x818 @ 1.00988
Oct 18 15:49:53 m2m-EP41-UD3L vdr: codec: latm
Oct 18 15:49:53  vdr: last message repeated 4 times
Oct 18 15:49:53 m2m-EP41-UD3L vdr: audio/alsa: using device 'default'
Oct 18 15:49:53 m2m-EP41-UD3L vdr: audio/alsa: start delay 336ms
چیز بدرد‌بخور داخلش هست ؟
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-18, 08:04 PM,
ارسال : #1337
Re: چگونگي نصب کارتهاي ماهواره(DVB)
شما بفرمایید از چه توزیعی استفادیه میکنید
دوما محتویات فایل متنی etc/apt/sources.list/

هر چه بيشتر مي آموزم بيشتر به ناداني خود پي مي برم
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-18, 08:30 PM,
ارسال : #1338
Re: چگونگي نصب کارتهاي ماهواره(DVB)
والا در حال حاضر آریوس 4 که بر پایه ابونتو 12.4 فاینال است را استفاده میکنم .
محتویات مخازن هم
کد :
# deb cdrom:[AriOS 4.0 - amd64]/ dists/precise/main/binary-i386/

# deb cdrom:[AriOS 4.0 - amd64]/ dists/precise/restricted/binary-i386/
# deb cdrom:[AriOS 4.0 - amd64]/ precise main restricted

# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://ir.archive.ubuntu.com/ubuntu/ precise main restricted
deb-src http://ir.archive.ubuntu.com/ubuntu/ precise main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://ir.archive.ubuntu.com/ubuntu/ precise-updates main restricted
deb-src http://ir.archive.ubuntu.com/ubuntu/ precise-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://ir.archive.ubuntu.com/ubuntu/ precise universe
deb-src http://ir.archive.ubuntu.com/ubuntu/ precise universe
deb http://ir.archive.ubuntu.com/ubuntu/ precise-updates universe
deb-src http://ir.archive.ubuntu.com/ubuntu/ precise-updates universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://ir.archive.ubuntu.com/ubuntu/ precise multiverse
deb-src http://ir.archive.ubuntu.com/ubuntu/ precise multiverse
deb http://ir.archive.ubuntu.com/ubuntu/ precise-updates multiverse
deb-src http://ir.archive.ubuntu.com/ubuntu/ precise-updates multiverse

## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://ir.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse
deb-src http://ir.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse

deb http://security.ubuntu.com/ubuntu precise-security main restricted
deb-src http://security.ubuntu.com/ubuntu precise-security main restricted
deb http://security.ubuntu.com/ubuntu precise-security universe
deb-src http://security.ubuntu.com/ubuntu precise-security universe
deb http://security.ubuntu.com/ubuntu precise-security multiverse
deb-src http://security.ubuntu.com/ubuntu precise-security multiverse

## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
# deb http://archive.canonical.com/ubuntu precise partner
# deb-src http://archive.canonical.com/ubuntu precise partner

## This software is not part of Ubuntu, but is offered by third-party
## developers who want to ship their latest software.
deb http://extras.ubuntu.com/ubuntu precise main
deb-src http://extras.ubuntu.com/ubuntu precise main
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-18, 08:58 PM,
ارسال : #1339
Re: چگونگي نصب کارتهاي ماهواره(DVB)
بفرمایید خروجی این دستور چیه؟
کد :
lsmod | grep nouveau

هر چه بيشتر مي آموزم بيشتر به ناداني خود پي مي برم
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ
2012-10-18, 09:05 PM,
ارسال : #1340
Re: چگونگي نصب کارتهاي ماهواره(DVB)
خروجی نداره خط فرمان آزاد میشه اما دستور زیر خروجی داره
کد :
m2m@m2m-EP41-UD3L ~ % lsmod | grep nvidia
nvidia              11262536  56
خوب فکر کنم از درایور غیر آزاد و رسمی انویدیا استفاده میکنم . این طور نیست ؟
جستجوی تمامی ارسال های کاربر
نقل قول این ارسال در یک پاسخ


رفتن به انجمن :


کاربران در حال مشاهده موضوع : 5 مهمان