[مهمان]

من با Fedora Core 1 مشكل پيدا كردم
ميخواستم بدونم كسي هست كه اطلا عات كافي راجع به فدورا داشته باشه يا نه؟

فقط لطفا نپرسين چرا حالا كه FC2 هم release شده من چرا تازه رفتم سراغ FC1

اما مشكل من :

من Fedora Core 1 رو روي لپ تاپم نصب كردم
فرآيند نصب كه هيچ مشكل خاصي نداشت اما اولين بار كه سيستم بالا اومد موقعي كه داشت Device هاي مختلف رو شناسايي مي كرد سيستم Hang كرد!
خب مسلما چاره اي جز reset نداشتم و البته چون keyboard هم قفل بود از power استفاده كردم اما بار بعدي و بعدي و ... هم در يك زمان مشخص فرآيند startup لينوكس متوقف مي شد.
بار آخر وقتي سيستم وارد Interactive Startup Mode شد من Alt+Ctrl+F1 رو زدم تا به mode متني برگردم .
ايجا بود كه مشكل رو پيدا كردم
لينوكس چندين device رو ميشناسه ولي وقتي به Firwire يا همون پورت IEEE 1394 مي رسه نميتونه اون رو Initialize كنه و hang ميكنه
چند خط آخرش به اين شكل هست:

Mounting local filesystems OK
Enabling local filesystems quotas OK
Enabling space Swap OK
Initializing firewire controller ohci1394

اين آخري OK كه نميشه هيچ , سيستم هم hang ميكنه :cry: :cry: :cry:

مي خواستم بدونم كسي راه چاره اي داره؟ :?:
يا لا اقل اگه firewire رو بخوام رو linux بي خيال شم چه دستوري بنويسم تا اصلا در startup لينوكس اونو شناسايي نكنه؟
يا اينكه چجوري ميشه كاري كرد كه لينوكس هرچي رو خواست بشناسه اول از من بپرسه كه ميخوامش يا نه؟

نميشه يه جوري startup لينوكس رو مثل ويندوز step by step كرد
منظورم پارامترهاي boot هست
فكر ميكنم چنين چيزي ممكن باشه

در پايان SOS PLEASE!!!

[مهمان]

[ltr]
ok, i don't ask that why are you using the previous version. i ask you that why are you using Fedora?
[/ltr]

[مهمان]

why not?
well , i've heard redhat is one of the most stable and popular versions so i managed to install it but that was not much of a good experience!!!
u offer anything else?
if so then come up with ur offer ...

[Faridb]

[ltr]
Just pass nofirewire as a boot option by editing grub.conf file.
[/ltr]

[Faridb]

[ltr]
Redhat has been a big name in linux industry but Fedora is just a project sponsored by redhat. So unfortunately it's not that reliable like debian that is another community-supported distribution yet.
Check fedora website and/or this:
<!-- m --><a class="postlink" href="http://www.linuxiran.org/modules/news/article.php?storyid=716">http://www.linuxiran.org/modules/news/a ... toryid=716</a><!-- m -->
[/ltr]

[Breakneck]

hi, i'm the guest ,well actually formerly the guest ,now i've become a member
first i should appreciate farid for his assistance but my problem was not solved and i'm getting hopeless little by little

what i recently found out was that there is NO SUPPORT FOR FIREWIRE in Fedora :cry:
it is stated at the bottom of the following page

http://www.linuxlookup.com/modules.php?o...tent&id=59

my system still hangs even after i used the nofirewire parameter in kernel boot parameters ,after i've changed it ,it looked like the followng :

ro root=label=/ hdc=ide-scsi rhgb nofirewire

but the system exactly hangs at the same point of startup procedure as it did before but now it does not echo anything about trying to initialize the firewire port
it just hangs when the very last step before firewire is OK ed

what should i do :?:

[alan]

سلام، اگر هنگام بوت دقت کنید، قبل نوشتن Welcome to Fedora Core می‌نویسه Press 'I' to enter interactive mode با چند بار فشردن I در همون موقع یکی یکی ازتون سوال می‌کنه. بعد هم می‌تونید بگید FireWire استارت نشه. بعدش هم با ورود به سیستم و دیدن دایرکتوری etc/rc5.d/ می‌تونید لینک firewire رو delete کنید تا دیگه استارت نشه. به همین راحتی!

[Breakneck]

I have also found a solution for FC2

http://www.ic.unicamp.br/%7Eoliva/snapsh...re/0README

I wonder if it could be implemented if FC1 as well cuz even the kernel is different

[Breakneck]

من هرچي I مي زنم هيچ اتفاقي نميفته
فقط مرتبا بين نوشته ها I هم نوشته ميشه

اما يك نكته جالب اينكه ظاهرا سري Compaq Presario 2500 همه اين مشكل رو دارن
اين لينك رو نگاه كنين :

http://www.linuxforums.org/forum/viewtop...t=firewire

[alan]

قبل از اینکه Welcome رو بنویسه شروع کنید I رو تایپ کردن....

[Faridb]

سلام همشهری عزیز!
عزیزم منم presario دارم و در redhat 9 کاری که کردم این بود که kudzu رو در سطح اجرایی ۵ کشتم!

[Breakneck]

سلام

ميشه بگي چجوري اين كارا رو كردي؟
من تازه واردم :wink:

راستي I زدن از قبل welcome هم فايده اي نداشت

[Faridb]

[ltr]
mv /etc/rc.d/rc5.d/S30kudzu /etc/rc.d/rc5.d/K30kudzu
I'm not sure about the sequence number of kudzu in FC1 but you must keep in mind that this bunch of scripts are executed according to their sequence number and that capital S stands for Start and captial K stands for Kill...
[/ltr]

[Breakneck]

Hi
thank u all, the problem was finally solved ( just the startup) by this
http://www.linuxquestions.org/questions/...ire+fedora

looks like Linux had problems with both USB and Firewire ports
I managed to use nousb and nofirewire together and finally linux started up!
but i'm gonna ask more and more and more ... :wink:

there is also a couple of usefull links here :

http://www.linuxquestions.org/questions/...ire+fedora

http://www.linuxquestions.org/questions/...ire+fedora

[Faridb]

[ltr]
What good news!
Well you see it's always true that's said in FLOSS you have always more than one way to do things!

Anyhow use [ ltr ] your text [ /ltr ] without the spaces for better text alignment.
and we're looking forward to your other questions!
[/ltr]

[Breakneck]

راستي مشكل Interactive Mode حل شد
من چون به فضاي case-insensetive ويندوز عادت كردم به جاي Shift-i فقط i رو فشار ميدادم